w77-CLAMPS HANSON CLAMPS

Hanson Clamps are a temporary fastener used to hold sheets and components together during riveting. They are typically installed every other hole. Rivets are installed in the remaining holes then clamps are removed.

w77-DRAWINGS-CLOSED

w77-DRAWINGS-OPEN

w77-DRAWINGS-INSTALLED

PART
NUMBER
COLOR
CODE
GRIP
RANGE
DIAMETER
D
DRILL
SIZE
HC-24
HC-34
HC-44
HC-54
HC-64
HC-84
Black
Zinc
Copper
Black
Brass
Copper
0 to 1/4” 1/16”
3/32”
1/8”
5/32”
3/16”
1/4”
51
40
30
20
11
F
HC-38
HC-48
HC-58
HC-68
HC-88
Zinc
Copper
Black
Brass
Copper
0 to 1/2” 3/32”
1/8”
5/32”
3/16”
1/4”
40
30
20
11
F
HC-312
HC-412
hc - 512
HC-612
Zinc
Copper
Black
Brass
1/2” to 3/4” 3/32”
1/8”
5/32”
3/16”
40
30
20
11

HANSON CLAMP PLIERS

HANSON CLAMP PLIERS are designed for fast, one handed in-stallation, and removal of all sizes of temporary clamps. They are constructed of heavy-duty forged steel for many years of use.

w77-PLIERS

PART NUMBER: HCP1

RIVETING SIDE GRIP CLAMPS

Designed to be used at the edge of the application when no holes are available. Ideal for riveting, bonding or gluing. To be used with HCP1 Hanson Rivet Clamp Pliers.

Part Number Grip Range Reach Body Length
HCSG-08 0-.725 .500 2-1/2″
HCSG-16 0-.725 1.00 2-1/2″
RIVET TAPE

RIVETING TAPE

HANSON RIVETING TAPE is used for hand installation of multiple rivets in an assembly.
Riveting tape is placed over the heads of rivets in an assembly to hold them in place during
riveting. After the rivets are up-set, the tape is removed leaving no adhesive on rivet heads
or components. This tape is thin and fl exible enough to eliminate any confl ict with tooling.
Riveting tape is a tough polyester fi lm with colored adhesive coating on the outside edges.
The center section is clear and uncoated for ease of visibility of rivets and to eliminate the
possibility of transferring adhesive to rivet heads during riveting.

PART
NUMBER
GOVERALL
WIDTH
ADHESIVE
WIDTH
CLEAR
WIDTH
ROLL
LENGTH
HRT-12 3/4″ 3/16″ 3/8″ 36 yds.
HRT-16 1″ 1/4″ 1/2″ 36 yds.