HANSON RIVETING TAPE
is used for hand installation of multiple rivets in an assembly. Riveting tape is placed over the heads of rivets in an assembly to hold them in place during riveting. After the rivets are up-set, the tape is removed leaving no adhesive on rivet heads or components. This tape is thin and flexible enough to eliminate any conflict with tooling. Riveting tape is a tough polyester film with colored adhesive coating on the outside edges. The center section is clear and uncoated for ease of visibility of rivets and to eliminate the possibility of transferring adhesive to rivet heads during riveting.
PART NUMBER |
OVERALL WIDTH |
ADHESIVE WIDTH |
CLEAR WIDTH |
ROLL LENGTH |
HRT-12 HRT-16 |
3/4” 1” |
3/16” 1/4” |
3/8” 1/2” |
36 yds. 36 yds. |