MAGNUM SUPER PREMIUM DRILL BITS
These bits are made of a special Hi-Molybdenum tool steel which is much tougher than cobalt steel.
They have a Split-Point design that makes the bit self-centering and non-walking.
- SELF-CENTERING
- NO DRILL WALKING
- LONGER CUTTING LIFE CUTS HARDER MATERIALS
- HOLDS TIGHTER HOLE SIZE
- RUNS COOLER USES LESS TORQUE
| TYPE 190-AG JOBBERS LENGTH DRILLS | |||||
| BIT SIZE |
DECIMAL EQUIVALENT |
BIT SIZE |
DECIMAL EQUIVALENT |
BIT SIZE |
DECIMAL EQUIVALENT |
|---|---|---|---|---|---|
| 1/16 | .0625 | A | .2340 | 18 | .1695 |
| 5/64 | .0781 | B | .2380 | 19 | .1660 |
| 3/32 | .0938 | C | .2420 | 20 | .1610 |
| 7/64 | .1094 | D | .2460 | 21 | .1590 |
| 1/8 | .1250 | E | .2500 | 22 | .1570 |
| 9/64 | .1406 | F | .2570 | 23 | .1540 |
| 5/32 | .1563 | G | .2610 | 24 | .1520 |
| 11/64 | .1719 | H | .2660 | 25 | .1495 |
| 3/16 | .1875 | I | .2720 | 26 | .1470 |
| 13/64 | .2031 | J | .2770 | 27 | .1440 |
| 7/32 | .2188 | K | .2810 | 28 | .1405 |
| 15/64 | .2344 | L | .2900 | 29 | .1360 |
| 1/4 | .2500 | M | .2950 | 30 | .1285 |
| 17/64 | .2656 | N | .3020 | 31 | .1200 |
| 9/32 | .2813 | O | .3160 | 32 | .1160 |
| 19/64 | .2969 | P | .3230 | 33 | .1130 |
| 5/16 | .3125 | Q | .3320 | 34 | .1110 |
| 21/64 | .3281 | R | .3390 | 35 | .1100 |
| 11/32 | .3438 | S | .3480 | 36 | .1055 |
| 23/64 | .3594 | T | .3580 | 37 | .1040 |
| 3/8 | .3750 | U | .3680 | 38 | .1015 |
| 25/64 | .3906 | V | .3770 | 39 | .0995 |
| 13/32 | .4063 | W | .3860 | 40 | .0980 |
| 27/64 | .4219 | X | .3970 | 41 | .0960 |
| 7/16 | .4375 | Y | .4040 | 42 | .0935 |
| 29/64 | .4531 | Z | .4130 | 43 | .0890 |
| 15/32 | .4688 | 1 | .2280 | 44 | .0860 |
| 31/64 | .4844 | 2 | .2210 | 45 | .0820 |
| 1/2 | .5000 | 3 | .2130 | 46 | .0610 |
| 33/64 | .5156 | 4 | .2090 | 47 | .0785 |
| 17/32 | .5313 | 5 | .2055 | 48 | .0760 |
| 35/64 | .5469 | 6 | .2040 | 49 | .0730 |
| 9/16 | .5625 | 7 | .2010 | 50 | .0700 |
| 37/64 | .5781 | 8 | .1990 | 51 | .0670 |
| 19/32 | .5938 | 9 | .1960 | 52 | .0635 |
| 39/64 | .6094 | 10 | .1935 | 53 | .0595 |
| 5/8 | .6250 | 11 | .1910 | 54 | .0550 |
| 41/64 | .6406 | 12 | .1890 | 55 | .0520 |
| 21/32 | .6563 | 13 | .1850 | 56 | .0465 |
| 43/64 | .6719 | 14 | .1820 | 57 | .0430 |
| 11/16 | .6875 | 15 | .1800 | 58 | .0420 |
| 45/64 | .7031 | 16 | .1770 | 59 | .0410 |
| 23/32 | .7188 | 17 | .1730 | 60 | .0400 |
| 47/64 | .7344 | ||||
| 3/4 | .7500 | ||||
| TYPE 130-AG 1/2” SHANK S & D DRILLS 6” overall length, 3 flats on shank |
|||||
| BIT SIZE |
DECIMAL EQUIVALENT |
BIT SIZE |
DECIMAL EQUIVALENT |
BIT SIZE |
DECIMAL EQUIVALENT |
|---|---|---|---|---|---|
| 33/64 | .5156 | 3/4 | .7500 | 63/64 | .9844 |
| 17/32 | .5313 | 49/64 | .7656 | 1 | 1.0000 |
| 35/64 | .5469 | 25/32 | .7813 | 1-1/32 | 1.0313 |
| 9/16 | .5625 | 51/64 | .7969 | 1-1/16 | 1.0625 |
| 37/64 | .5781 | 13/16 | .8125 | 1-3/32 | 1.0938 |
| 19/32 | .5938 | 53/64 | .8281 | 1-1/8 | 1.1250 |
| 39/64 | .6094 | 27/32 | .8438 | 1-5/32 | 1.1563 |
| 5/8 | .6250 | 55/64 | .8594 | 1-3/16 | 1.1875 |
| 41/64 | .6406 | 7/8 | .8750 | 1-7/32 | 1.2188 |
| 21/32 | .6563 | 57/64 | .8906 | 1-1/4 | 1.2500 |
| 43/64 | .6719 | 29/32 | .9063 | 1-5/16 | 1.3125 |
| 11/16 | .6875 | 59/64 | .9219 | 1-3/8 | 1.3750 |
| 45/64 | .7031 | 15/16 | .9375 | 1-7/16 | 1.4375 |
| 23/32 | .7188 | 61/64 | .9531 | 1-1/2 | 1.5000 |
| 47/64 | .7344 | 31/32 | .9688 | ||
| TYPE 175-AG MECHANICS LENGTH DRILLS Shorter lengths, 3 flats on shank on 3/16” and larger |
|||||
| BIT SIZE |
DECIMAL EQUIVALENT |
BIT SIZE |
DECIMAL EQUIVALENT |
BIT SIZE |
DECIMAL EQUIVALENT |
|---|---|---|---|---|---|
| 1/16 | .0625 | 7/32 | .2188 | 3/8 | .3750 |
| 5/64 | .0781 | 15/64 | .2344 | 25/64 | .3906 |
| 3/32 | .0938 | 1/4 | .2500 | 13/32 | .4063 |
| 7/64 | .1094 | 17/64 | .2656 | 27/64 | .4219 |
| 1/8 | .1250 | 9/32 | .2813 | 7/16 | .4375 |
| 9/64 | .1406 | 19/64 | .2969 | 29/64 | .4531 |
| 5/32 | .1563 | 5/16 | .3125 | 15/32 | .4688 |
| 11/64 | .1719 | 21/64 | .3281 | 31/64 | .4844 |
| 3/16 | .1875 | 11/32 | .3438 | 1/2 | .5000 |
| 13/64 | .2031 | 23/64 | .3594 | ||
| TYPE 178-AG 3/8” SHANK MECHANICS LENGTH DRILLS 3 Flats on Shank |
|||||
| BIT SIZE |
DECIMAL EQUIVALENT |
BIT SIZE |
DECIMAL EQUIVALENT |
BIT SIZE |
DECIMAL EQUIVALENT |
|---|---|---|---|---|---|
| 13/32 | .4063 | 29/64 | .4531 | 31/64 | .4844 |
| 27/64 | .4219 | 15/32 | .4688 | 1/2 | .5000 |
| 7/16 | .4375 | ||||
COUNTERSINKS – SPIRAL FLUTE 100° Standard Included Angle (82 & 90 Degree Special Order) |
||||||||
| “D” | “S” | PART NUMBER |
“D” | “S” | PART NUMBER |
“D” | “S” | PART NUMBER |
|---|---|---|---|---|---|---|---|---|
| 1/4” | 3/16” | CA4003-1 | 1/2” | 1/4” | CA4003-5A | 7/8” | 1/2” | CA4003-8 |
| 1/4” | 1/4” | CA4003-1A | 1/2” | 3/8” | CA4003-5A | 1” | 1/2” | CA4003-9 |
| 5/16” | 1/4” | CA4003-2 | 5/8” | 1/4” | CA4003-6A | 1-1/8” | 1/2” | CA4003-10 |
| 3/8” | 1/4” | CA4003-3 | 5/8” | 3/8” | CA4003-6A | 1-1/4” | 5/8” | CA4003-11 |
| 7/16” | 1/4” | CA4003-4 | 3/4” | 1/2” | CA4003-7 | 1-1/2” | 3/4” | CA4003-12 |
RIVET REMOVAL DRILL-OUT GUIDE
The Hanson Rivet Drill Guide is a simple tool that makes it easy to remove installed rivets. The kit contains 5 different drill guides made of hardened steel, 5 matching Cobalt Jobber bits and Boelube.
The Hanson Drill Guide centers a drill bit “dead center” on a protruding style rivet head so you can drill through the head of the rivet every time regardless of experience. Once the head is drilled through the remaining shank can be either be drilled through or knocked out. The Drill Guide is designed to work on Round, Universal, Pan, Brazier, Oval and Truss style heads.
The Drill Guide kit includes: 5 Rivet Drill Guides with bits for: 3/32″, 1/8″, 5/32″, 3/16″ & 1/4″ diameter rivets. A canister of Boelube.
Toll Free: 1-800-RRRIVET
